Table of Contents
Advertisement
Step 2
Configure Date & Time parameters. See Table 4-27.
Parameter
Description
Date Format
Select the date format.
Time Format
Select the time format from 12-hour or 24-hour.
Time Zone
Select the time zone that the radar is at.
Configure system time. Click Sync PC, and the system time will sync to the time
Current Time
on PC.
Enable DST as needed.
DST
Select the check box, and then configure start time and end time of DST with
Date or Week.
Select NTP check box to enable NTP function and the system will sync time to
NTP
the Internet server.
Server
Set the address of time server.
Port
Set the port of time server.
Interval
Set the sync interval between the radar and the time server.
Click Save.
Step 3
Figure 4-54
Date & Time
Table 4-27 Date & Time parameter descriptions
69
User's Manual
Advertisement
Table of Contents
