Table of Contents
Advertisement
PROBLEM
Water marks
left on glasses
and cutlery
Hard water
TROUBLESHOOTING
POSSIBLE CAUSE
Rinse aid level or dosage
setting is too low.
WHAT TO DO
Ensure there is rinse aid in dispenser. If
necessary, increase the rinse aid setting
or try using a wash program with a
higher temperature. Refer to 'Rinse aid'
for information.
Increase the rinse aid setting and
the amount of detergent. Refer to
'Preferences' and 'Water hardness'.
If living in an area with very hard
water, consult a plumber on installing a
household water softener.
35
Advertisement
Table of Contents
