Table of Contents
Advertisement
Removing and cleaning the filter
1
filter cap
2
filter base
Replacing the filter
locating
notch
1
2
MAINTENANCE
Twist the filter anti-clockwise to release.
Lift to remove.
Separate the filter cap from the base by
pressing the release buttons and lifting.
Do not attempt to remove the filter by
force as this may cause damage.
Clean under hot water and rinse thoroughly.
Align the filter cap with the notch on the
filter base. Click together to secure.
Place the drain filter back into the dishwasher
base. Rotate clockwise to click into place.
29
Advertisement
Table of Contents
