Table of Contents
Advertisement
Operating instructions
To add a forgotten item:
1. Press START/PAUSE to pause the washer.
2. Wait for the door to unlock automatically, and then open the door.
3. Add the item, close the door, and then press and hold START/PAUSE. The cycle will
resume.
Getting started
1. Load your washer.
2. Add liquid (or powdered) detergent and additives to the dispenser (see the "Detergent
use" section on page 47).
3. Select the appropriate cycle and options for the load (see the "Washing a load of laundry"
section page 33).
4. Close the lid.
5. Press and hold START/PAUSE.
6. The Wash Indicator illuminates.
7. The estimated cycle time will appear in the display. The time may fluctuate to indicate the
time remaining in the cycle.
NOTE
The actual time required for a cycle may differ from the estimated time in the display
depending on the water pressure, water temperature, detergent, and laundry.
8. Before your washer starts to fill, it will make a series of clicking noises to check the door
lock and do a quick drain.
NOTE
•
When the cycle is complete, the
the display.
•
Pressing POWER cancels the cycle and stops your washer.
•
The Wash, Rinse, and Spin indicators will illuminate during those portions of the cycle.
32 English
Door Lock indicator will go out and "0" will appear in
Advertisement
Table of Contents
