Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for DeWalt DCW604NT
Summary of Contents for DeWalt DCW604NT
- Page 1 DCW600 DCW604...
- Page 2 Fig. A DCW604 Fig. B Fig. C...
- Page 3 Fig. D Fig. E Fig. F1 Fig. F2 Fig. F3...
- Page 4 Fig. H Fig. G Fig. I Fig. J Fig. L Fig. K...
- Page 5 Fig. M Fig. N1 Fig. N2 Fig. O...
-
Page 6: Technical Data
EnGLIsH PLUNGE ROUTER DCW600, DCW604 Congratulations! EC-Declaration of Conformity You have chosen a D WALT tool. Years of experience, thorough Machinery Directive product development and innovation make D WALT one of the most reliable partners for professional power tool users. Technical Data Plunge Router DCW600 DCW604... -
Page 7: Work Area Safety
EnGLIsH Batteries Chargers/Charge Times (Minutes) Weight (kg) DCB104 DCB107 DCB112 DCB113 DCB115 DCB118 DCB132 DCB119 Cat # DCB546 18/54 6.0/2.0 1.05 DCB547 18/54 9.0/3.0 1.46 135* 135* DCB548 18/54 12.0/4.0 1.44 DCB181 0.35 DCB182 0.61 60/40** 60/40** DCB183/B 0.40 DCB184/B 0.62 75/50** 75/50**... - Page 8 EnGLIsH h ) Do not let familiarity gained from frequent use of contacts eyes, additionally seek medical help. Liquid tools allow you to become complacent and ignore ejected from the battery may cause irritation or burns. tool safety principles. A careless action can cause severe e ) Do not use a battery pack or tool that is damaged or injury within a fraction of a second.
-
Page 9: Residual Risks
EnGLIsH Electrical Safety • ALWAYS remove the battery before making adjustments or changing bits. The electric motor has been designed for one voltage only. • Keep hands clear of bits when motor is running to Always check that the battery pack voltage corresponds to the prevent personal injury. -
Page 10: Charger Operation
EnGLIsH To remove the battery pack from the charger, push the power supply when there is no battery pack in the cavity. battery release button 2 on the battery pack. Unplug charger before attempting to clean nOTE: To ensure maximum performance and life of lithium-ion •... -
Page 11: Important Safety Instructions For All Battery Packs
EnGLIsH drywall screws (purchased separately) at least 25.4 mm long battery pack. Do not use a battery pack or charger that with a screw head diameter of 7–9 mm, screwed into wood to has received a sharp blow, been dropped, run over or an optimal depth leaving approximately 5.5 mm of the screw damaged in any way (i.e., pierced with a nail, hit with exposed. -
Page 12: Storage Recommendations
EnGLIsH Transporting the FLEXVOLT Battery Do not expose to water. The D WALT FLEXVOLT battery has two modes: Use and Transport. Use Mode: When the FLEXVOLT battery stands alone or is in Have defective cords replaced immediately. WALT 18V product, it will operate as an 18V battery. When the FLEXVOLT battery is in a 54V or a 108V (two 54V batteries) Charge only between 4 ˚C and 40 ˚C. - Page 13 EnGLIsH 1 Li-Ion battery pack (C1, D1, L1, M1, P1, S1, T1, X1, Y1 models) DO nOT use under wet conditions or in the presence of flammable liquids or gases. 2 Li-Ion battery packs (C2, D2, L2, M2, P2, S2, T2, X2, Y2 models) DO nOT let children come into contact with the tool.
- Page 14 EnGLIsH the Motor from the Plunge Base (if needed). 1. Open the locking lever 12 (fixed base) or 40 (plunge base). 2. Clean and insert the round shank of the desired router bit 2. Using a hex wrench turn locking lever adjustment screw 24 ...
- Page 15 EnGLIsH Installing a Plunge Base Parallel Fence with 4. Attach hose adaptor to dust extraction system attachment. When using dust extraction system attachment, be aware of Guide Rods, DCW604 Only (Fig. H) the placement of the dust extraction system. Be sure the dust A parallel fence with guide rods may be included with your extraction system is stable and its hose will not interfere with plunge base unit.
-
Page 16: Operation
EnGLIsH 2. Open the plunge base locking lever 40 WARNING: Do not change the turret stop while the router is running. This will place your hands too near the 3. Making sure the spindle lock button is facing front, insert the cutter head. -
Page 17: Maintenance
EnGLIsH Cutting with the Fixed Base (Fig. C) Variable Speed Control (Fig. A) This router is equipped with a variable speed dial with 7 4 Set up the router to use the fixed base by following the speeds between 16000 and 25500 RPM. Adjust the speed by instructions in the Assembly and Adjustments section. -
Page 18: Protecting The Environment
EnGLIsH Cleaning WARNING: Blow dirt and dust out of the main housing with dry air as often as dirt is seen collecting in and around the air vents. Wear approved eye protection and approved dust mask when performing this procedure. WARNING: Never use solvents or other harsh chemicals for cleaning the non-metallic parts of the tool.