wayscral KICKWAY E1 User Manual page 84

Replacing the wheels
Rear wheel
Loosen the screws ①: two on each side of the wheel.
•
Remove the cover ②, then disconnect the motor cable.
•
Unscrew the nuts of the motor ③: one on each side of the wheel.
•
Remove the rear wheel from the scooter.
•
Front wheel
Unscrew the nuts of the front wheel ④: one on each side of the
•
wheel.
Remove the front wheel from the scooter.
•
To replace the wheel or tube, it is recommended that you contact
•
a qualified technician at your retailer.
Lubrication recommendations
Lubricating components is necessary for the proper functioning and life
of your scooter and to prevent corrosion of components.
Use special transmission oil for brake cables. After washing: dry and
then oil the mechanically moving components (brake lever and caliper
axles, cable, folding parts). To ensure a watertightness, grease the stem
and headset sufficiently.
84/269