wayscral KICKWAY E1 User Manual page 83

Insert each new pad one by one, they adhere magnetically to the brake
caliper. Correctly position the new pads so that the braking surfaces
come into contact.
Do not touch the braking surfaces. Insert the pads one by one into the
brake caliper. Then adjust the brakes as described in the previous
paragraph.
Changing the brake cable
If your brake cables are damaged or deteriorated after a long period of
use, it is essential to change them. To do this, follow the steps below.
Loosen the screw on the brake caliper.
•
Remove the brake cable from the brake lever.
•
Remove the brake cable from its sheath.
•
Insert a new brake cable into the sheath (contact your retailer for
•
a new brake cable)
Insert the brake cable into the brake lever.
•
Adjust the braking force: see the previous chapter.
•
83/269