Canon MB5450 Series Online Manual page 871

Important
• When using a model with which you cannot scan over a network from the operation panel, Scan-
from-Operation-Panel Settings may appear in the Scan-from-PC Settings screen; however, the
setting is not available.
Note
• If your scanner or printer does not appear, check the following, click OK to close the screen, then
reopen it and try selecting again.
• MP Drivers is installed
• Network settings of your scanner or printer is completed after installing the MP Drivers
• Network communication between your scanner or printer and computer is enabled
If your scanner or printer still does not appear, refer to "Problems with Network Communication" for
your model from Home of the Online Manual.
• You do not need to use this software when scanning via USB. Refer to
Scanner Selector EX2" to delete it. You can scan via USB even if it is not deleted.
871
"Uninstalling IJ Network