Canon MB5450 Series Online Manual page 1038

Errors When You Receive Fax
If an error occurs when you receive a fax, the error number is printed on RX REPORT or ACTIVITY
REPORT (there are some errors for which the cause is also printed).
The causes corresponding to the error numbers are as follows.
No. Cause
#003 It takes too long to re-
ceive a page.
#005 No answer.
#037 Memory is full.
#046 Reception has been re-
jected due to the speci-
fied fax rejection condi-
tion.
#099 The Stop button was
pressed during recep-
tion.
#995 The received fax was
deleted.
cord before automatic redialing is complete, all faxes stored in the printer's memory
are deleted and not sent.
Resend the document.
Action
Contact the sender and have the sender divide the fax or set the image quality (Fax
resolution) to a lower setting and resend it.
When receiving a fax manually, the printer could not detect the signals from the
sender's fax device.
Contact the sender and have the sender resend it, or set the printer to receive the
fax automatically.
The printer could not receive a fax because its memory is full.
Delete contents in memory, and then ask the sender to resend the fax. See
ment Stored in Printer's
Reception has been rejected because the fax matches the fax rejection condition
specified by FAX reception reject in Security control under FAX settings.
For details, see Rejecting Fax
The Stop button was pressed to cancel reception of the fax. Contact the sender and
have the sender resend it if necessary.
The received fax was deleted before being saved to the USB flash drive, forwarded
to the shared folder on the computer, or printed. Contact the sender and have the
sender resend it if necessary.
Memory.
Reception.
1038
Docu-