Canon MB5450 Series Online Manual page 352

Enter the password for sending to perform the authentication.
POP before SMTP
Select if you send e-mail with POP before SMTP authentication.
Next, you can specify the following settings.
• Incoming mail server (POP3)
Enter the address of your POP server.
• Port number (POP3)
Enter the port number of your POP server.
• Incoming account
Enter the account name for receiving to perform the authentication.
• Incoming password
Enter the password for receiving to perform the authentication.
• Use APOP authentication
Select if you send the password by the encryption transmission.
• Clear mailbox
Select if you delete the e-mails that remain in the POP3 server.
Important
• When this setting is enabled, e-mail in the Inbox on the server will have all been removed. If
you specify the e-mail address of your everyday, be sure to disable this setting as unread e-
mail is not deleted. We recommended that you prepare this printer dedicated e-mail
account not to accidentally delete the unread e-mail.
No authentication
Select if the authentication is not necessary.
6. After specifying mail server settings, select OK.
The setting operation is completed.
Note
• To make sure that the mail server settings have been specified correctly, select Test connection
to mail server.
352