Table of Contents
Advertisement
SETTING OVEN CONTROLS
Setting the clock
When the appliance is first plugged in or when the
power supply to the appliance has been interrupted, the
display will flash "12:00". It is recommended to always
set the clock for the correct time of day before using the
appliance.
To set the clock:
1. Press
once (do not hold pad down).
2. Within 5 seconds, press and hold the
the correct time of day appears in the display.
NOTE
The clock cannot be changed during any timed bake or
self-clean cycle.
Changing between continuous bake setting
or 12-Hour Energy Saving feature
The oven control has a built-in 12-Hour Energy Saving
feature that will shut off the oven if the control is left on
for more than 11 hours and 59 minutes. The oven can
be programmed to override this feature for continuous
baking.
Changing to continuous bake setting:
1. Press and hold
heard, " — — hr" will appear in display for continuous
cooking. The current time of day will return to the
display.
2. To cancel the continuous bake setting, press
and hold for 5 seconds until tone is heard. "12hr"
will appear in display indicating that the control has
returned to the 12-Hour Energy Saving feature.
16
All manuals and user guides at all-guides.com
or
down for 5 seconds until tone is
Changing temperature display (°F or °C)
The electronic oven control is set to display in °F
(Fahrenheit) when shipped from the factory. The oven can
be programmed for any temperature from 170°F to 550°F
(77°C to 287°C).
To change the temperature to display °C (Celsius)
or from °C to °F (control should not be set for Bake
or Self-clean when setting this feature):
1. Press
until
2. Press and hold the
display.
3. Press and hold
display.
4. Press the
5. Press any control pad to return to normal operating
mode.
Setting a silent control panel
When choosing a function, a beep will be heard each time a
pad is pressed. If desired, the control can be programmed
for silent operation. Press and hold
the control will beep once. This will block the controls from
sounding when a pad is pressed. To return the sound, press
and hold
again for 7 seconds until the control beeps
once.
NOTE
* The OVEN indicator light on the electronic display
will turn ON and OFF when using the Bake feature
and during preheat. This is normal and indicates that
the oven is cycling to maintain the selected baking
temperature. When the preheat indicator light turns OFF,
your oven is ready.
. "— —" appears in the display.
until "HI" appears in the
until °F or °C appears in the
or
to change °F to °C or °C to °F.
. After 7 seconds,
Advertisement
Table of Contents
