13: Parameters; Setting Parameters For The Device; Copying Parameters From Other Device - FIBARO Home Center 3 Lite Operating Manual

13: PARAMETERS

Devices allows to customize their operation to user's needs using
configurable parameters. The settings can be adjusted via Z-Wave
controller to which the device is added. In the interface parameters are
presented as simple options in Advanced Settings of the device.

13.1: SETTING PARAMETERS FOR THE DEVICE

1. Open the Configuration interface.
2. Go to
> Devices.
3. Click the device you want to change its behaviour.
4. Open the Parameters tab.
5. Find the parameters you're interested in.
6. Adjust the setting.
7. Click Save when you finish.
8. If the device is battery powered, wake it up manually or wait for next
automatic wake up. If the device changes configuration, you will be
asked to refresh the screen.

13.2: COPYING PARAMETERS FROM OTHER DEVICE

1. Configuration of the device can be copied from another device with
the same parameters list.
2. Open the Configuration interface.
3. Go to > Devices.
4. Click the device you want to copy the parameters to.
5. In the Copy configuration from field choose device you want to copy
the parameters from.
6. Click COPY.
7. Save the parameters.
8. If the device is battery-powered, wake it up manually or wait for the
next automatic wake-up. If the device changes configuration, you will
be prompted to refresh the screen.
23
parameters