FIBARO Home Center 3 Lite Operating Manual page 18

18
In the Device Settings (
go to
able change door lock configuration.
Meter
In the Device Settings (
go to
meter.
• Click
Multilevel Sensor
In the Device Settings (
go to
Multilevel Switch
In the Dashboard
sidebar you will see the last known state and you will be able to:
• Click
• Click
• Change slider position – set new level,
• Click
• Click
• Click
Notification
In the History Panel
with information about the type of the notification and event/state.
Sound Switch
In the Dashboard
sidebar you will see the last known state (like currently played tone,
default tone) and you will be able to:
• Click
• Click
• Click
• Click
• Click
• Change
In the Device Settings (
go to
change default tone and volume.
managIng DevIces
tab. In
Advanced Door Lock Configuration
tab. You will see the type, scales and rate type of the
Advanced
RESET in Meter reset
tab. You will see the type and scales of the sensor.
Advanced
, click
ON – set 0xFF,
– set 0x00,
OFF
– start level change up,
– start level change down,
– stop level change.
, you will see all the received Notification Reports
, click
ON – start playing the default tone,
– stop playing,
OFF
Play tone, then select tone – start playing the selected tone,
MUTE – mute the sound switch,
UNMUTE – unmute the sound switch,
Volume slider position – set new volume.
Advanced tab. In Sound Configuration section you will be able
> Devices), click the device to expand it and
> Devices), click the device to expand it and
section – reset the accumulated data.
> Devices), click the device to expand it and
on device tile, then on the displayed
on device tile, then on the displayed
Devices), click the device to expand it and
>
section you will be