The figure below shows the installation of battery.
Front of display
During installation, the inlet and outlet holes
During installation, the inlet and outlet holes
of the filter catridge should be aligned with
of the filter element shall be aligned with the
the two holes of the wall base.
two holes of the wall base.
Open the cover of the battery box on the back
Open the cover of the battery box on the
and install three #7 standard batteries.
back and install three #7 standard batteries.
Install Filtration Faucet
Select a suitable flat installation position on the sink
or table, drill an installation hole with a diameter of
14-20 mm, and install the water tap according to the
figure below.
PE
The insertion depth of PE pipe :19mm
9
19mm