Table of Contents
Advertisement
•
•
•
•
•
•
•
•
•
Important Consideration
Note: All the contents of this document are related
to safety, and users must abide by it. The
precautions in this document explain the danger,
the degree of hazard, and the accidents that can
occur if product is used incorrectly.
• In order to ensure the safety and normal use of the
water purifier, the product must be installed and
repaired by the installation and maintenance
service provider authorized by our company.
Otherwise, our company will not bear any
responsibility for the accidents caused by the
installation and maintenance
• This water purifier is designed for household users.
For use in other places, please consult the service
hotline or authorized service provider.
• For the maintenance and filter element
replacement of the water purifier, please contact
the authorized after-sales service personnel or the
consulting service hotline.
• Please read and understand the instructions
carefully before any operation.
• It is forbidden to tilt the water purifier during
transportation, installation and use.
• Do not install the water purifier in direct sunlight,
rain or near harmful chemicals, or any place
where the water purifier may be damaged due to
falling or being hit.
• Make sure that the water purifier is far away from
any heat source. Do not connect it to a hot water
pipeline, and do not try to install the water purifier
upside down.
• It is strictly forbidden to install the water purifier
in a place that may be frozen. The temperature
range of the water purifier is 5 ℃ - 38 ℃. When the
water temperature or environmental temperature
is lower than 5 ° C, please close the water supply
pipeline of the water purifier (close the water
supply T-valve at the same time) and drain the
water in the purifier. If the water supply pipeline or
water purifier freezes, it may cause damage to the
water supply pipeline or shell, or even rupture,
affecting the use.
• Working pressure: 0.1 ~ 0.4MPa. The pressure
should not be less than 0.1MPa during use. If the
inlet water pressure exceeds 0.4MPa, a pressure
reducing valve (need to be purchased separately)
must be installed.
2
Advertisement
Table of Contents
