Table of Contents
Advertisement
Solving Problems
/ : On
/
: Flashing
Light
Status
Wi-Fi connection error has occurred.
An ink cartridge is expended or there is
insufficient ink in the cartridge to charge the
ink.
An ink cartridge is not installed.
An ink cartridge has not been recognized.
An unsupported ink cartridge has been
installed.
An ink cartridge is nearly expended.
You can print until the
No paper is loaded or more than one sheet
has been fed at a time.
Flashing slowly (at 1.25 second intervals)
A paper jam has occurred.
Flashing fast (at 0.5 second intervals)
Paper remains inside the printer.
❏ The printer was not turned off correctly.*
❏ Because the printer was turned off while
operating, the nozzles may have dried
and clogged.
* The power was turned off with a power
strip or breaker, the plug was pulled out of
the outlet, or an electrical failure occurred.
>
Checking Lights and Printer Status
H
light turns on.
Solutions
Press the
button to clear the error and try again.
To ensure you receive premium print quality and to
help protect your print head, a variable ink safety
reserve remains in the cartridge when your printer
indicates it is time to replace the cartridge. Replace
with a new ink cartridge.
Install the ink cartridge.
Press the ink cartridge down firmly.
Install an ink cartridge that is supported by this
printer.
You cannot use the cartridges that came with your
printer for replacement.
Prepare a new ink cartridge. You can check the ink
levels from the computer.
Load paper and press the
Remove the paper and press the
Load A4 size paper in the rear paper feeder, and then
press the
or
inside. Load paper in the portrait direction.
❏ After clearing the error by pressing the
button, we recommend performing a nozzle
check. Cancel any pending print jobs.
❏ To turn off the printer, make sure you press the
button.
122
or
button.
or
button.
button to remove the paper
or
P
Advertisement
Table of Contents
