Flex FX0451 Operator's Manual page 11

CORD WARP (FIG. 3)
Fig. 3
When the charger is not in use, neatly wrap
the power cord around on the cord wrap to
eliminate tripping hazards.
The end of the power cord can also be snapped
into the cord clip.
Cord Clip
Cord Wrap
ATTACHING/DETACHING STORAGE BOX
Fig. 4
(NOT INCLUDED)
The charger can be attached to a FLEX storage
box (not included) as shown in Fig. 4
To attach the charger to the box:
Align the charger with the storage box. Secure
Catch
the catches on both ends of the charger with the
spring-loaded latches on the storage box.
To detach the charger from the box:
Pull the spring-loaded latches outwards and
remove the charger from the storage box.
Spring-loaded Latch Storage Box
-11-