Advertisement
NOTE : Specifications and others are subject to change without notice for improvement.
1. Application range
This specification is applied to the LED LCD TV used LD91L
chassis.
2. Requirement for Test
Each part is tested as below without special appointment.
1) Temperature : 25±5ºC (77±9ºF), CST : 40±5ºC
2) Relative Humidity : 65±10%
3) Power Voltage : Standard input voltage(100-240V@
50/60Hz)
* Standard Voltage of each products is marked by models.
4) Specification and performance of each parts are followed
each drawing and specification by part number in
accordance with BOM.
5) The receiver must be operated for about 5 minutes prior to
the adjustment.
4. Electrical specification
- Module General Specification
No
Item
1
Screen Device
2
Aspect Ratio
3
LCD Module
4
Operating Environment Temp. : 0 ~ 50 deg
4
Storage Environment
5
Input Voltage
6
Power Consumption
7
Module Size
8
Pixel Pitch
9
Back Light
10
Display Colors
11
Coating
Copyright ©2009 LG Electronics. Inc. All right reserved.
Only for training and service purposes
SPECIFICATION
Specification
47" wide color display module
16:9
47" TFT LCD FHD 200Hz
Humidity : 10 ~ 90%
Temp. : -20 ~ 60 deg
Humidity : 10 ~ 90 %
AC100-240V~, 50/60Hz
Power on (White)
Typ : 183
1083.6 (H) x 628.8 (V) x 25.5mm (D)
0.5415 (H) x 0.5415 (D)
LED
1.06Billion colors (10 bit)
3H(Hard coating)
3. Test method
1) Performance: LGE TV test method followed
2) Demanded other specification
- Safety: CE, IEC specification
- EMC:CE, IEC
LCD (Module) + Backlight(LED)
With inverter
- 6 -
Remark
LGE Internal Use Only
Advertisement
