Safety Considerations And Symbol Descriptions; Regarding This Manual; Explanation Of Symbols; Observe The Following Symbols - Buderus Logano G115/3 WS Installation And Service Instructions Manual

1

Safety Considerations and Symbol Descriptions

1.1

Regarding this Manual

This document contains important information regarding safe and
proper installation, operation and maintenance of the boiler.
The high tech G115 WS boiler is designated as a hot water heating
boiler.
The Installation and Maintenance Instructions are directed to the
installing contractor who has professional knowledge regarding boiler
installation and maintenance.
1.2

Explanation of symbols

Warnings are indicated by a warning triangle and a grey
background.
Signal words are used to indicate the seriousness of the ensuing risk if
measures for minimising damage are not taken.
• Caution indicates that minor damage to property may occur.
• Warning indicates that minor personal injury or severe damage to
property may occur.
• Danger means that severe personal injury may occur. Very serious
cases may result in death.
Notes are identified in the text by this symbol. They are
bounded by horizontal lines above and below the text.
Notes contain important additional information.Notes do not contain
any warnings or information about hazards or risks.
Logano G115 WS US/CA – 6 720 813 418 (2019/09)
Safety Considerations and Symbol Descriptions
1.3

Observe the following Symbols

All applicable local, state, and national codes and regulations must be
observed for the installation of the boiler:
• The local building code requirements regarding placement,
combustion air and venting and chimney system must be followed.
• Follow applicable electrical code requirements.
• Follow the local code and standards regarding safe boiler operation.
NOTICE
Use only original Buderus spare parts. Buderus can not
be held liable for damage caused by non-Buderus parts.
NOTICE
The boiler installation must be performed by a qualified
installer in accordance with regulations put forth in
NFPA-31 Installation of Oil-Burning Equipment. The
installation must comply with all local and national
codes, regulations and authorities having jurisdiction
regarding the installation of oil fired boilers.
For Canada refer to the guidelines of CSA/CGA-B139
Installation Codes.
1
3