Selecting Audible Signal Operation; Warning Chimes And Warning Indicator; Disabling Keyless Access Function - Subaru Crosstrek 2016 Owner's Manual

2-18
Keys and doors/Keyless access with push button start system
dealer.
NOTE
The setting can be changed by your
SUBARU dealer. Contact your SUBARU
dealer for details. Also, for models with
the multi function display, the setting
can be changed by operating the multi
function display. For details, refer to
Keyless access setting (models with
keyless access with push-button start
system ) 3-84.
Selecting audible signal op-
eration
Using an electronic chirp, the system will
give you an audible signal when the doors
lock and unlock. If desired, you may turn
the audible signal off. For more details,
contact a SUBARU dealer.
NOTE
For models with the multi function
display, the setting can be changed by
operating the multi function display.
For details, refer to Keyless buzzer
volume setting 3-79.
Warning chimes and warning
indicator
The keyless access with push-button start
system sounds a warning chime and
flashes the access key warning indicator
on the combination meter in order to
minimize improper operations and help
protect your vehicle from theft.
For details, refer to Warning chimes and
warning indicator of the keyless access
with push-button start system
Disabling keyless access
function
WARNING
If you wear an implanted pacemaker
or an implanted defibrillator, per-
form the procedure described in
By operating the driver s door
2-19 to disable the keyless access
function. If you perform the proce-
dure described in By operating the
access key 2-18, the operation of
an implanted pacemaker or im-
planted defibrillator may be affected
by the radio waves from the trans-
mitter antenna.
When the vehicle is not going to be used
for a long time, or when you choose not to
use the keyless access function, the
keyless access function can be disabled.
NOTE
. The locking and unlocking function
by the remote keyless entry system is
not disabled.
. The setting can also be changed at
SUBARU dealers. For more details,
contact a SUBARU dealer.
. To start the engine while the func-
3-25.
tions are disabled, perform the proce-
dure described in
9-19.
. We recommend that you disable the
keyless access functions under the
following conditions.
When the vehicle is not going to
be used for an extended period of
time
When the keyless access func-
tions are not going to be used
Disabling functions
By operating the access key
If you have registered a PIN code for PIN
Code Access, you can disable the keyless
access function by operating the access
key. For details about registering a PIN
code, refer to Registering a PIN code
2-22.
1. Open the driver s door.
Starting engine