Memory Specifications; Storage Controller Specifications; Drives; Ports And Connectors Specifications - Dell PowerEdge XR4510c Installation And Service Manual

Table of Contents

Advertisement

Memory specifications

The PowerEdge XR4510c system supports the following memory specifications for optimized operation.
Table 8. Memory specifications
DIMM type
DIMM Rank
RDIMM
Dual Rank
LRDIMM
Quad Rank
Table 9. Memory module sockets
Memory module sockets
4, 288-pin
NOTE:
Memory DIMM slots are not hot swappable.
NOTE:
The DIMM memory speed is 3200 MT/s. However, the system memory operating speed is up to 2933 MT/s due to
CPU restrictions.

Storage controller specifications

The PowerEdge XR4510c system supports Boot Optimized Storage Subsystem (BOSS-N1): 2 x M.2 SSDs as internal boot.

Drives

The PowerEdge XR4510c system supports up to 4 x M.2 SSDs (M.2 2280 and M.2 22110) installed on M.2 riser module.

Ports and connectors specifications

USB ports specifications

Table 10. PowerEdge XR4510c USB specifications
USB port type
USB 3.0-compliant port
Micro-AB USB 2.0-
compliant port for iDRAC
Direct

NIC port specifications

The PowerEdge XR4510c system supports up to four Network Interface Controller (NIC) ports embedded on the LAN on
Motherboard (LOM).
16
Technical specifications
DIMM capacity
16 GB
32 GB
64 GB
128 GB
Front
No. of ports
Two
One
Single processor
Minimum system capacity
16 GB
32 GB
64 GB
128 GB
Internal (Optional)
USB port type
Internal USB 3.0-compliant
port
Maximum system
capacity
64 GB
128 GB
256 GB
512 GB
Speed
3200 MT/s
No. of ports
One

Advertisement

Table of Contents
loading

Table of Contents