Cleaning The Brush Roll - Bissell SPINWAVE R5 Manual

Mop Mode (continued)
Maintaining the Mop Pads and Debris Trap
1.
Turn power switch OFF.
Press button on top of mop
tank and pull to remove. Place
tank upside down on a soft
surface.
4.
Empty dirt bin after each
use, including after mopping.

Cleaning the Brush Roll

Check out the BISSELL Connect App for tips and videos on maintenance.
1.
Turn power switch OFF.
Pinch tabs on brush guard
inward and pull to remove. Lift
to remove brush roll.
WARNING
troubleshooting checks.
10 global.BISSELL.com
2.
Firmly pull up on mop pads
to remove from mop pad
drivers. Replace mop pads
if damaged. Machine wash
separately in warm water.
5.
Push tab on the top of
mop tank to open dirt bin and
empty it.
2.
Clean brush roll with
cleaning tool. Remove endcaps
from brush roll by pulling apart
to thoroughly clean.
To reduce the risk of fire, turn the power switch OFF before performing maintenance or
3.
To reattach, use middle hole
on pads to align with driver.
6.
Lift up on filter cover
located on top of tank and
remove filter. Brush off dust
and debris from filter.
3.
Reinstall brush roll and
brush guard.