Emerson VILTER VSG Installation, Operation And Service Manual page 5

We hereby declare that the following machinery is intended to be incorporated into other machinery, and must
not be put into service until the relevant machinery into which it is to be incorporated has been declared in con-
formity with the essential requirements of the Machinery Directive 2006/42/EC.
Machine Description:
Make:
Type:
Model Size:
Manufactured by:
The following transposed harmonised European Standards have been used:
EN ISO 12100-1: 2010
EN ISO 13857: 2008
EN349:1993 + A1: 2008 - Safety of Machinery - Minimum gaps to avoid crushing hazards.
EN ISO 13850: 2015
IEC/EN60204-1 (2016) - Safety of Machinery - Electrical equipment of machines - Specification for general
A technical construction file for this machinery is retained at the following address:
Vilter Manufacturing, LLC.
5555 South Packard Avenue
P.O. Box 8904, Cudahy
Wisconsin 53110-8904, USA
Vilter's Authorized Representative in Europe is Emerson S.R.L., company No J12/88/2006, Emerson 4 Street, Parcul
Industrial Tetarom II, Cluj-Napoca 400638, Romania. For product compliance destination sales questions in Europe,
contact the Regulatory Compliance Department:
In Great Britain, it is Emerson Process Management Ltd., Company No 00671801, Meridian East, Leicester, LE19
1UX, United Kingdom. For product compliance destination sales questions contact the Regulatory Compliance
Department: ukproductcompliance@emerson.com
Signed for and on behalf of Vilter Manufacturing, LLC.:
5555 South Packard Avenue
VSG & VSSG Single Screw Compressor • Installation, Operation and Service Manual • Emerson • 35391SB
EC Declaration of Incorporation
Industrial Compressor
Vilter
VSM / VSS / VSR /VSH / VSSH / VSG & VSSG Single Screw Compressor
71, 91, 97, 101, 111, 113, 127, 128, 145, 151, 160, 180, 204, 221, 222, 243, 152, 182, 202,
301, 361, 401, 501, 601, 701, 291, 341, 451, 601, 751, 901, 791, 891, 1051, 1201, 1301, 1501,
1551, 1801, 1851, 2101, 2401, 2601, 2801, 3001.
Vilter Manufacturing, LLC.
- Safety of Machinery - General principles for design-Risk assessment and risk reduction.
- Safety of Machinery - Safety distances to prevent danger zones being reached by the
upper and lower limbs.
- Safety of Machinery - Emergency stop equipment - Principles for design.
requirements.
Vilter Manufacturing, LLC.
t P.O. Box 8904
001-414- 744-0111
europeproductcompliance@emerson.com
(+44 11 6282 23 64).
t Cudahy, Wisconsin 53110-8904
t FAX: 001-414-744-3483
(+40 374 132 000).
Last update: September 2021
iii