Advertisement
For smoothies
1
Place the blender on a flat surface. Make sure it is unplugged and
the speed knob is in the "off" position.
2
Put the ingredients into the jar. Ensure you have enough liquid
content to create a smooth consistency, but make sure the amount
of ingredients does not exceed the maximum level as indicated
on the jar.
3
Close the jar lid and place the measuring cup into position. If the
jar lid is not closed properly, the blender will not work.
4
Place the jar onto the jar base, and make sure it is installed correctly.
5
Plug in the blender.
6
Turn the speed knob to "on". All three buttons on the motor unit
will blink.
7
Press the smoothie button. The indicator light will stop blinking
and remain lit, and the blender will start to work.
8
If you wish to add more ingredients to the jar while the blender is
working, you can remove the measuring cup and add them through
the jar lid before replacing the cup.
9
After making the smoothie, the blender will stop working
automatically and the indicators of three buttons will blink again.
10 Unplug the blender and then remove the jar from the motor unit.
Carefully remove the jar cover, and pour and serve.
!
CAUTION!
-
Never use hot liquids or run an empty blender.
-
Do not attempt to remove the jar while the blender is working.
If you need to remove the jar, turn off the blender first.
-
Do not operate the blender for more than 3 minutes at a time,
and allow 5 minute rest time between 2 continuous cycles. If to
operate the blender up to 10 cycles continuously, must rest it for
30 minutes to cool it down to room temperature
-
You must unplug the blender before removing the jar.
!
NOTE
-
You cannot adjust the blender with the speed knob when the
appliance is running under the smoothie mode.
-
During the process of making a smoothie, if you want to stop the
blender, you can press the smoothie button again or turn the speed
knob to the "off" position.
9
Advertisement
