Advertisement
More information about
your blender's functions
The smoothie function
The smoothie programme is one minute long, and runs at various
speeds to allow for a smooth blending result.
When you press the smoothie button, the light will remain lit,
and the other two button lights will switch off. The blender will then
operate at high speed for ten seconds, maximum speed for twenty sec-
onds, minimum speed for twenty seconds, and then maximum speed
for ten seconds before the programme finishes and the three button
lights begin to flash again.
The auto-clean function
The auto-clean programme is forty-five seconds long, and stops
and starts to allow for thorough cleaning of your blender.
When you press the auto-clean button, the light will remain lit, and the
other two button lights will switch off. The blender will then operate at
a low speed for six seconds, stop for a second, start again for a second,
stop for a second and start again for ten seconds. Then the blender will
then operate at maximum speed for five seconds, stop for a second, start
again for a second, stop for a second and then operate for eight seconds
before working at maximum speed for another ten seconds before the
programme finishes and the three button lights begin to flash again.
The ice crush function
The ice crush programme is thirty seconds long, and stops and starts
in short bursts. When you press the ice crush button, the light will
remain lit, and the other two button lights will switch off.
The blender will then operate at maximum speed for a second and
then stop for two seconds, and will run this cycle a total of ten times
before the programme finishes and the three button lights
begin to flash again.
The pulse function
When you turn the speed knob to "P", the blender will
run at the maximum speed. The three function buttons will be dark.
Turning the speed knob from MIN to MAX
When you turn the speed knob to MIN, the blender will operate at
the minimum speed of 17000 ±15% rpm. When you turn the knob to
MAX, the blender will operate at the maximum speed of 22000 ±15%
rpm. Turning the knob from MIN to MAX, or visa versa, allows you to
smoothly change the speed of the blender. You will notice when you
use the speed knob in this way that the three function buttons are dark.
!
Note: do not operate your blender with an empty jug for more than
fifteen seconds. You may break the blender if you do.
11
Advertisement
