Advertisement
Cleaning and maintenance
1 - Rotate base clockwise
2 - Lift out blade assembly
12
Before cleaning, make sure the blender is unplugged and the speed
knob is in the "off" position.
Auto-clean
The Auto-clean button can help to clean the blender and blade assembly
easily and safely.
1
After use, reassemble the jar and pour in about 400-500ml warm
water.
2
Turn the speed knob to the "on" position; the indicator lights on
the three buttons will begin to blink.
3
Press the Auto clean button once. The indicator light will stop
blinking and remain lit, and the blender will start to work.
4 After the blender finishes cleaning, the appliance will stop working
automatically and the indicators of three buttons will blink again.
5
Unplug the appliance and remove the jar from the motor unit.
Rinse the jar under running water.
6
Wipe the outer surface of the motor unit with a damp cloth.
Do not use abrasive cleaners. Never immerse the motor unit in
water or any other liquid.
All parts, except the motor unit, are dishwasher safe.
You can also wash the parts, except the motor unit, in warm, soapy
water. After washing, dry all parts and then reassemble. However, store
the appliance with the jar lid slightly open to allow air to circulate and
prevent jar odours.
Never immerse the motor unit in water.
Disassemble to clean blade assembly
To achieve a thorough clean of the blade assembly it may be necessary to
disassemble the jug unit.
!
CAUTION! - Remove all content from the glass jar first.
!
CAUTION! - The blade is very sharp. Handle it carefully when cleaning.
1
Gripping the base, rotate clockwise to separate the blade assembly
from the glass jug.
2
Lift out the blade assembly taking extra care when handling the
blades.
The jug and blade assembly can be hand-washed or washed in a
dishwasher. Reverse the steps to re-assemble.
Advertisement
