E-MetroTel 5010W Xstim Quick Reference Manual

Make a Call
1. Lift handset and dial –OR- dial and lift handset .
2. Press Line/Speaker/Headset key and dial.
3. Press Redial soft key to call the last dialed number.
4. Press Call history button, use Recvd/Placed/Missed
soft key to toggle through call types, use Up/down
navigation keys to view entries, press Call soft key to
call the selected entry.
5. If monitoring other phone(s) with BLF keys, press the
BLF line key to call the monitored extension.
6. To intercom an extension, press the VoiceCall line key
followed by the extension.
7. If target extension is busy or do not answer, press the
RingAgn soft key. When it is available, you will be
notified by a beep and visual prompts, press the Yes
soft key to make the call.
Answer a Call
1. Pickup handset –OR- press Speaker/Headset key
-OR- press Answer soft key. Press Ignore soft key to
stop the ringing.
2. If BLF line key is alerting, press BLF key to pickup call.
3. To pickup a call ringing at another extension, press the
DNPickup line key followed by the extension
–OR- Pickup line key if in the same pickup group.
While on a Call
1. Press Speaker/Headset key to switch modes, lift
handset to switch back to handset mode.
2. Press Transfer key and dial the number. Press Transfer
again to complete the transfer or press Cancel soft key
to return to the call.
3. To transfer to voicemail, press TransToVM line key
followed by the mailbox number.
4. To park the call, press the Park soft key, the parking lot
number will be announced. Dial the parking lot
number to retrieve the call.
5. If BLF direct call park line key is configured, press the
BLF key to park the call. Press BLF key again to
retrieve the call.
Multi-party Calls
1. While on a call, press the Conference soft key and dial
to make a new call, press Conference again to add the
new party into the conference.
2. While on an active call, make or receive a second call
by pressing the second DN line key, the first call will be
placed on hold. Press the corresponding DN line key to
toggle between calls.
To join all parties into a conference, press Conference
followed by the Join soft key, then the DN line key on
hold.
www.emetrotel.com