Page 1
UCX solution, without the prior written consent of E-MetroTel. Title in and to this document and all information contained herein remains at all times the property of E-MetroTel LLC.
Page 3
UC306W User Guide UCx 4.5 Safety Precautions Please read this instruction book carefully before use. Intrinsically safe products are prohibited from connecting with other unauthorized devices! Use of electric batteries other than our supplies is strictly prohibited. During maintenance, do not change any component parts, specification, model or parameters of the intrinsic safety circuit.
Page 4
UC306W User Guide UCx 4.5 Standby time: 100h Airtime: 6h Package Contents One UC306W cell phone One charger One USB to AC adaptor Storage Temperature: -10~40°C Relative humidity: not higher than 90% (25°C) Duration: 12 months Overview Structural Diagram Quick Start Guide...
Page 5
UC306W User Guide UCx 4.5 Menu Structure Messages Contacts (Phonebook) Call Log (Call history) Network AP Config Signal Protocol Internet protocol Advanced Settings AP Search Ping test Off Network AP Mode Adhoc Mode PTT setting PTT Usage System Setting Phone Setup...
UCx 4.5 1 Overview UC306W WiFi SIP phone is easy to operate and carry. With the proper network coverage (802.11b/g), voice communication and message communication are achieved between cell phones. The phone enjoys a high receiving sensitivity, which guarantees the maximum utilization of wireless network. It is also characterized by low power consumption and long standby time.
Idle Screen If the phone is already configured with a SIP profile, the UC306W SIP phone will automatically search for a network and register to the SIP server. The registration status and signal intensity will be displayed on the screen.
Page 9
UC306W User Guide UCx 4.5 Press the right "Back" soft key to return to the Network menu Navigate down to " AP Search " and press the "OK" soft key (Details in section 4.4.5) Find your Access Provider (AP) from the list and press the "Save" soft key You will be prompted to enter the security key if this is a secured network You are now in the "...
Page 10
UC306W User Guide UCx 4.5 End Call Press " Hang Up " key to end the call, or cancel dialing. Adjust Volume Adjust the volume via the menu selection (set volume?) , or by pressing the " Navigation " keys during conversation.
UC306W User Guide UCx 4.5 4 Menu Structure To access the main menu, press the left soft key to access the "Menu", then use the up and down navigation keys to access the submenus: Messages (SMS) Contacts (Phonebook) Call Log (Call history)
UC306W User Guide UCx 4.5 To access messages not sent. Draft To indicate the storage status of every box, i.e. the number of messages that can be stored Status and the number that has been stored. 4.2 Contacts (Phonebook) In the phonebook function, you can list all your contacts, save, edit or delete entries. You can also use "groups"...
UC306W User Guide UCx 4.5 Group info will list all the groups in your phonebook. Group info Use the up and down navigation key to select the group to view the list of contacts in that group. Use the up and down navigation key to select the contact and press the "Call" key to initiate a call.
UC306W User Guide UCx 4.5 The network menu is mainly used to set WIFI wireless parameters, IP network parameters and VOIP parameters. Please contact your system administrator to obtain the correct network parameters. You need to enter the admin password to access this menu. The default admin password is 080921 You must re-boot your phone for the new settings to take effect.
UC306W User Guide UCx 4.5 Parameters Description SSID This option is to set the AP's SSID. Input the network name (32 alphanumeric characters maximum), and press the soft key on the left. Set Security This option is to set the security parameters of the WIFI wireless network. You can choose from Open System, WEP key, WPA-TKIP, WPA-AES.
Page 16
UC306W User Guide UCx 4.5 This option is used to set VOIP and other protocols. This option is used to set the SIP parameters. After entering the data for each field, press the left soft key to save the information.
UC306W User Guide UCx 4.5 SNTP To set parameters related to Internet time. Parameters Description NTP Mode Use this option to enable of disable NTP NTP Server Enter the IP address of the NTP Server Update Now Select this option to execute the update Tracker To enable and configure mobile assisted positioning parameters.
UC306W User Guide UCx 4.5 You need to set the IP address, subnet mask, default gateway and DNS server parameters only when DHCP is disabled. Parameters Description DHCP If DHCP is enabled, DHCP server will assign an IP address to the phone.
UC306W User Guide UCx 4.5 This option is used to set the channel of wireless network. The default channels are: AP Channel 1, 6 and 11. PM Mode Select PM mode: PS-POLL or PS-PMBIT SMS CHARSET Select SMS character set: UTF8 or GB2312...
UC306W User Guide UCx 4.5 Use the Ping function to test connectivity of your network. 4.5 Off Network Set the communication mode, choose between AP and Ad-hoc communication modes. The phone will reboot automatically each time you switch between the two modes.
UC306W User Guide UCx 4.5 The idle screen in Adhoc mode will display the SIP number. If the SIP number has not been configured previously, the phone will generate a number automatically. The example below shows the number "708". To change the SIP number, perform the following steps: Enter the menu Network ->...
UC306W User Guide UCx 4.5 Enable, categorize or set operational mode of Push-To-Talk (PTT). Parameters Description Enable or disable the PTT function PTT Group Configure the PTT group number. Up to 4 groups are supported: 0 to 3. PTT Authority...
Page 24
UC306W User Guide UCx 4.5 To initiate transmission, press and hold the PTT key until you hear a beep sound, transmission will continue as long as you hold the PTT key. To end the transmission, release the PTT key and you will hear 2 short beeps. Now your phone is in receiving status.
UC306W User Guide UCx 4.5 The PTT function uses broadcast technology, in WIFI networks, the time delay of broadcast packet is closely associated with AP's DTIM value. To achieve good intercom quality, it is recommended to set DTIM value to 1. Below is an example of the router configuration where the DTIM value is set.
UC306W User Guide UCx 4.5 4.7.1 Phone Setup Menu Description Selection Use this option to set the current time and date, you can also select the time and date Date/Time formats. Language Set phone language to be Simplified Chinese or English.
UC306W User Guide UCx 4.5 5 Maintenance New batteries are possibly not fully charged. Please fully charge them before use. Do not charge batteries when the ambient temperature is higher than 45°C or lower than -10°C. LCD reacts relatively slow under low temperature. This is a normal phenomenon, and will not affect the performance of your phone.
Question: Why is the phone unable to roam? The roaming function of UC306W is limited to APs with the same SSID. If you roam to an AP coverage area with a different SSID, you have to reset the user name and password of SSID.