System Function Menu - VIETA VPC55BT User Manual

Treble
When in TREBLE, user can use the track up or down button to select the desired TREBLE
parameter and rotate the encoder knob to change the desired parameter:
1. LEVEL: adjust the Treble level from -6 to +6.
2. C.FREQ: adjust the Treble center frequency (C.FREQ) as10KHz, 12.5KHz, 15KHz, or
17.5KHz.
Balance & Fader (Bal / Fad)
When in BAL & FADER mode, user can use the track up or down button to switching mode
between FADER and BALANCE for adjustment.
1. Rotate the encoder knob to adjust the Balance range from Balance left 06 to Balance Right
06 (Balance Center for this unit is Balance C00).
2. Rotate the encoder knob to adjust Fader range from Fader front 06 to Fader Rear 06 (Fader
Center for this unit is Fader C00).
Preset Audio EQ Menu
There are 8 different type of preset equalizer available for user selection. Once access into
the iEQ menu, rotate the encoder knob to navigate thru "FLAT", "ROCK", "R&B", "JAZZ",
"DANCE", "COUNTRY", "REGGAE" and "CLASSIC". Once the desired iEQ appears on the
display, short press the "MENU" button to confirm the selection.
a. The factory default iEQ setting is "FLAT"
b. Once the iEQ function is activated, if user adjust the audio setting like BASS /
MIDDLE / TREBLE / SUBWOOFR, the iEQ setting will automatic resume to "FLAT"mode.

System Function Menu

The following items can be adjusted once accessed into the system function menu.
Date set
When in Date Set mode, user can rotate the encoder knob to adjust:
(1) mm(month) from 01(Jan) to 12 (Dec)
(2) dd (Date) from 01 (1st) to 31 (31st)
(3) www (week day) from Mon(Monday) to Sun (Sunday)
(4) yy (year)
User can short press the 'MENU' button to confirm the enter and move to the next entry.
Clock Set
The time of the clock will be set to 12:00 as the default. User can rotate the encoder knob to
adjust and short press the "MENU" button to confirm the entry and move to the next entry.
Time Format
This option allow the selection of 12 hour or 24 hour time display format in this unit. "12
Hour" is the default setting. Rotate the encoder knob to change to the 24 hour time format.
This is a level indicator of your current car battery voltage condition.
Tips
If the battery level indicates 10 Volt or below, it is highly recommended that the user
should consult with the nearest installer or dealer to check the battery condition.
BR - 13