Locationand Function Of Controls - VIETA VC-HA4000BT User Manual

Locationand function of controls

1. RELEASE BUTTON
Press the REL button to release the front control
panel fromthe unit chassis, then pull it up a little to
remove fromthe unit chassis.
2. POWER ON/OFF & MUTE
When the unit is power off, the unit comes to on
by pressing any button except the EJECT and the
RELEASE button.
When the unit is power on, press and hold the power
button for more than 0.5 seconds, the unit goes into
power off mode.
When the unit is power on, press the power to switch
the MUTE state on/off.
3. CD SLOT
4. LCD Display
5. EJECT KEY
In the power on state, the loaded disc can be ejected
by pressing the EJ key.
6&7. TUNE, SEEK, TRACK, SKIP UP/DOWN
BUTTONS
a) During RADIO mode:
Press and hold the >>| button to activate MANUAL
searching mode.
12
IN MANUAL mode: Press the >>| or |<< button
briefly to manual tune up/down for the desired radio
station frequency step by step.
INAUTO mode: Press the >>| or |<< button, to
automatically tune up/down for the radio station
frequency.(If in MANUAL mode and without further
operation, the unit will change to AUTO mode a few
seconds later.)
b) During disc, USB playback mode:
Press the >>| button briefly to play next track.
Press the |<< button briefly to play the current track
fromthe beginning of it if the playing time is more
than 2 seconds.
Press the |<< button briefly to play the previous
track if the playing time is less than 2 seconds.
Press the >>| or |<< button and hold to skip
forwards or backwards, release to resume normal
playback.
8. SEL (MENU) BUTTON AND VOLUME UP
( + )/ DN ( - ) KONB
a) Press the SEL button briefly, it is activated as
selecting each mode of E. VOL.
-> VOLUME ->BASS ->TREBLE -> BALANCE ->
FADER ->
CD/USB/SD Android Radio