TABLE OF CONTENTS Key to symbols used ..........................3 Safety instructions ..........................3 Important information Warranty ....................................3 Liability ....................................3 Guarantee ....................................4 Technical information Description ..................................4 Use .......................................5 Application limits.................................6 Components Ventilation unit ..................................6 Operator terminal ................................6 Commissioning Installation inspection .................................6 Switching on ..................................7 Maintenance Supply air and extract air filter ............................7...
The full installation inspection must be • Use of the unit to dry out building shells and new carried out by a qualified technician trained by Hoval. buildings • Ventilation of several residential units. In the event of danger: •...
The advantages of the enthalpy recovery unit are: • Temperature efficiency up to 90% • Degree of humidity recovery up to 95% With the acquisition of a Hoval unit, you also obtain • Transmission performance can be adjusted comprehensive warranty cover under the Hoval terms continuously of warranty.
® activated during commissioning. module carries out the following functions: • Operation of all Hoval units connected to the bus. • Authorisation management for operation. • Efficient control of the ventilation system by working Settings on the operator terminal with day programmes.
TECHNICAL INFORMATION, COMPONENTS AND COMMISSIONING Application limits Appareil de commande Application limits for unit setup, weather-protected The HomeVent comfort ventilation unit is operated ® (EN 60721-3-3) via an operator terminal. You can choose between two 3K5 as per EN 50090-2-2 operator terminals.
(e.g. dust, traffic etc.). Thorough cleaning of the HomeVent ® Comfort ventilation unit by Hoval Cus- tomer Service or an installer trained by Hoval. Conclude a service agreement with Ho- val, and your HomeVent comfort ven- ®...
MAINTENANCE 7.1.2 "Filter change" procedure Caution: Observe the correct air flow direction Disconnect the HomeVent comfort ventilation ® when inserting the filters (arrows on the unit power plug. filter)! Insert cover and push on firmly. Pull out filter cover. Connect the HomeVent comfort ventilation ®...
Change fuse (a replacement fuse (a) is available in the unit) Insert prefilter cover. Slide in insert Insert plug Spare parts Use only genuine Hoval accessories. You will find the ordering addresses on the back page of this manua. Fuse change Designation Filter class Art.No.
LOGS Logs Plant logs Installer ............................................................................................................................................................................Electrician ............................................................................................................................................................................Hoval Customer Service (see back page of this manual) ................................... Subject to modifications 4 215 415 / 02...
LOGS Filter maintenance log Please make a note of the actions you have carried out in the log below! E.g.: When you have inspected the sup- ply air filter, circle the 'I' in the supply air filter column and enter the date on which the inspection was carried out. If servicing tasks are performed by several persons, the person who carried out the task should enter their name in the last column in case any questions arise later.
Need help?
Do you have a question about the HomeVent comfort FR 201 and is the answer not in the manual?
Questions and answers