Table of Contents
Advertisement
•
Reset to Default: Select Yes to reset all the
picture settings above.
Sound settings
You can view and change the following sound
settings.
•
Sound Mode: You can set the projector to
use the following sound modes, depending
on your environment, audio type or
preferences.
•
Music: Optimize the bass and treble
levels for music.
•
Movie: Optimize the bass and treble
levels for movies.
•
User: Define your own bass and treble
levels.
•
Output: Select the projector's audio output
type.
•
Internal Speaker: Use the projector's
internal speaker to output audio.
•
ARC: Use an HDMI™ ARC compatible
device to output audio. To learn how
to connect such a device, see Connect
to a device through HDMI™ ARC, page
14.
•
Volume: Adjust the volume of the projector.
Tip: To adjust the volume of Android TV,
exit the projector's settings menu and press
the volume control buttons on the remote
control.
•
Bass: Set the bass level. This menu item
is enabled only when the sound mode is
User.
•
Treble: Set the treble level. This menu item
is enabled only when the sound mode is
User.
•
Stereo Balance: Adjust the stereo balance
to compensate for volume differences
between the left and right speakers at the
listening position.
•
Reset to Default: Select Yes to reset all the
sound settings above.
18
Image settings
You can view and change the following image
settings.
•
Location: You can select a location and
then modify the image settings. All the
modified image settings will be associated
with the selected (current) location. You
can create up to 3 different sets of image
settings this way and quickly switch
between them by selecting a location. Tip:
The projector always selects the last used
location after being restarted.
•
Room 1: Select this to use or modify the
image settings for Room 1.
•
Room 2: Select this to use or modify
the image settings for Room 2.
•
Room 3: Select this to use or modify the
image settings for Room 3.
•
Install Mode: Adjust the projection to
the correct direction based on how the
projector is installed.
•
Aspect Ratio: Toggle between the available
aspect ratios (16:9 and 4:3). Choose Auto
to let the projector automatically use the
recommended aspect ratio.
•
V/H Keystone: Select this to manually make
the image rectangular by adjusting the
horizontal and vertical keystone angles.
•
Four Point Keystone: Select this to manually
make the image rectangular by moving four
corners of the image.
•
Digital Zoom: Scale down the screen to up
to 50% of its full size. The default value is
100% (no scale-down).
•
Reset to Default: Select Yes to reset all the
image settings above for all the locations
(Rooms 1, 2 & 3).
Philips · NeoPix 720
Advertisement
Table of Contents
