Advertisement
ALL / CEILING INSTALLATION
BEFORE REPAIRING THE HEATER, MAKE SURE YOU HAVE TURNED OFF THE MAIN ELECTRICITY SUPPLY.
Caution:
When the appliance is not operated for a long period of time, cleaning or maintenance is conducted or when
the location of the heater is changed, the heater should be turned to OFF and unplugged from the electrical
connection. Periodic inspection and removal of dirt and contaminants will ensure that equipment can be
operated safely.
1. Make sure the heater is always switched off before cleaning.
2. Check the Reflector and IR-Filament for dirt, dust or contaminants at least once a month. If
necessary, apply cleaning and maintenance process.
3. The number of checks may be increased considering the amount of the dust in the environment.
4. Check the deformation of the Reflector, Wire and Frame visually while cleaning the appliance. In
case of deformation, consult your technical service.
5. Check the Power Cord and Plug visually while cleaning the appliance. In case of deformation,
consult your technical service.
6. Never install the heater under extreme hot environments.
WALL / CEILING INSTALLATION
MAINTENANCE CAUTIONS
WARNING
Advertisement
