Subscribe to Our Youtube Channel
Related Manuals for Vent-Axia 2kW
Summary of Contents for Vent-Axia 2kW
- Page 1 2kW Downflow Fan Heater Installation and Operating Instructions PLEASE READ INSTRUCTIONS IN CONJUNCTION WITH THE ILLUSTRATIONS. PLEASE SAVE THESE INSTRUCTIONS 220-240V ~ 50Hz IP23 Ref:- 404486...
-
Page 2: Heater Operation
IMPORTANT Read these instructions fully before using the heater. Retain these instructions for future reference. The heater has a loading of 2kW. It is designed for permanent wall mounting and is suitable for operation on A.C electricity supply having the same voltage as shown on the rating label. -
Page 3: Mounting The Heater
MOUNTING THE WALL HEATER The heater is secured to the wall with three screws (provided). Mark the position of the three holes on the wall (Diagram A & B) Make the holes 8mm diameter to a depth of 40mm in the wall. Insert the three plastic Wall plugs (provided) into the holes. -
Page 4: Electrical Connections
ELECTRICAL CONNECTIONS Before undertaking installation work, ensure the electricity supply is disconnected from any relevant fixed wiring. The heater is supplied with a pre-connected length of cable. This appliance should therefore be installed by a competent electrician in accordance with the IEE wiring regulations. The supply circuit must be adequate for the input of the appliance and must be protected with a 10A fuse.
Need help?
Do you have a question about the 2kW and is the answer not in the manual?
Questions and answers