At+Awsen; At+Awscid - USR IOT Cortex-M7 Series At Command Manual

<CR><LF>+OK=<subnum,suben,topic,mode,Qos,cut,comn><CR><LF>
Set

AT+MQTTSUB=<subnum,suben,topic,mode,Qos,cut,comn><CR>
<CR><LF>+OK<CR><LF>
Parameter

subnum:1~16, each serial port support maximum 16 topics.

puben

ON: enable.subscribe this topic message from server.

OFF:disable.default.

topic:maximum 128 characters

mode

0: only send payload to serial port.default.

1: topic and payload are sent to serial port.

Qos: 0,1,2.default 0.

cut: separator or delimiter between topic and payload. e.g. &#44 represent comma.

comn:serial port number. 1~n.

E.g.AT+MQTTSUB=1,ON,/SubTopic1,1,0,&#44,1

2.5.65. AT+AWSEN

Function

Query/set whether to enable AWS IOT service
Format

Query

AT+AWSEN<CR>
<CR><LF>+OK=<sta><CR><LF>
Set

AT+AWSEN=<sta><CR>
<CR><LF>+OK<CR><LF>
Parameter

sta

ON: enable

OFF:disable.default.

E.g.AT+AWSEN=ON

2.5.66. AT+AWSCID

Function

Query/set client ID
Format

Query

AT+ AWSCID<CR>
<CR><LF>+OK=< clientid><CR><LF>
Your TrustWorthy Industrial IoT Partner 35
AT command set
www.pusr.com