At+Uartmn; At+Sockmn(M:socket Number,A~H.n:serial Port Number,1~8) - USR IOT Cortex-M7 Series At Command Manual

Serial to ethernet device server
Table of Contents

Advertisement

Format
Query
AT+RFCENN<CR>
<CR><LF>+OK=<status><CR><LF>
Set
AT+ RFCENN =<status><CR>
<CR><LF>+OK<CR><LF>
Parameter
ON: enable.default
OFF: disable
E.g.AT+RFCEN1=ON

2.5.18. AT+UARTMN

Function
Query/set serial port interface type of PortN(N520-H7-6)
Format
Query
AT+UARTMN <CR>
<CR><LF>+OK=<status><CR><LF>
Set
AT+UARTMN =<status><CR>
<CR><LF>+OK<CR><LF>
Parameter
status
232: default
485
E.g.AT+UARTM1=485

2.5.19. AT+SOCKMN(M:socket number,A~H.N:Serial port number,1~8)

Function
Query/set Socket M parameters of PortN
Query
AT+SOCKMN<CR>
<CR><LF>+OK=<protocol,IP,port ><CR><LF>
Set
AT+SOCKMN=< protocol,IP,port ><CR>
<CR><LF>+OK<CR><LF>
Parameter
Protocol
TCPS TCP Server
TCPC TCP Client
Your TrustWorthy Industrial IoT Partner
17
AT command set
www.pusr.com

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Cortex-M7 Series and is the answer not in the manual?

Related Products for USR IOT Cortex-M7 Series

This manual is also suitable for:

Usr-n510Usr-n520Usr-n540Usr-n580

Table of Contents