Vorwerk thermomix VS100 User Manual page 16

8 Sealing Operation
1. Connect mains power.
2. Press the "Open / Close" button to open the device.
3. Put the contents into a vacuum sealing bag or pre-sealed vacuum
sealing roll. Then slot the openning into the device properly.
Remark: If you open the upper cover widely, you can observe that
the best insertion length is about 3cm, so that the bag is fully in
contact with the thermo sealing strip. The cover will not remain
open by snapping in or simmilar. Please close it carefully before
inserting a bag or roll for vacuuming or sealing.
about 3cm
4. Press "Seal" to start sealing, the "Seal" button is lit till the sealing
process is done, then the device will open automatically.
15