Magellan SporTrak SporTrak Color Reference Manual page 7

SporTrak, but once you can visualize what a multileg route (route) is, it
becomes very easy to understand and create. If you understand that a
GOTO is a 1-leg route with a starting point and a destination point,
then imagine a bunch of GOTO's strung together where the destination
of one GOTO is the starting point for the next GOTO. That means if
you had three GOTO's, one from "A" to "B", another from "B" to "C"
and a third from "C" to "D" you could then put them together to make
one multileg route. In this example you would have a 3-leg route that
went from "A" to "B" to "C" to "D".
From
Any
Screen
These routes have an advantage over GOTO's in that A) the starting
point does not have to be your present position, B) they are always in
memory and if activated they remain activated, even when you turn the
SporTrak off and then back on, and C) they can be saved and used over
and over again.
(Note: these routes have been termed "multileg" in an effort to make the
understanding of them a little clearer, however you could create a
1-leg route and save it in the SporTrak's memory.)
SporTrak Color GPS Mapping Receiver
A
Highlight
Routes
Step 1:
Select
Select
Waypoint
starting
Category
waypoint
Select
Waypoint
from List
Step 2:
Use up/down arrows to move
Select leg
highlight to next available leg in
destination
the route. Indicated by dashes.
waypoint
Select Use left/right
Waypoint arrows to
Category
"Find By"
Repeat Step 2 for all additional legs in the route.
Step 3:
Use up/down
Save the
arrows to highlight
route
"Save Route" button
B
C
Select an
"Empty"
Route
Use L/R arrows
to select
"Find By"
Select
Waypoint
select
from List
Reference
D
45