Mounting The Antenna - Wavecom TR2126SE Installation And Operation Manual

2.2.2 Mounting the Antenna

Mount the antenna according to the manufacturer's instructions.
☛
The TR2126SE is intended for use with flat planar arrays and dipole/parabolic reflectors. Please
consult table 2.2
☛
Table 2.2B: Antenna List
Transceiver Power
(Watts)
0.316
0.316
0.316
0.316
☛
Included with the TR2126SE unit is a self-adhesive label for application to the antenna. To
operate the TR2126SE in compliance with FCC regulations, you must apply the included label to
the antenna. Peel off the protective backing from the label and affix it to the antenna such that
the label is readable from a distance of 5 feet.
for further information.
B
Antenna Type
(dBm)
25 Flat planar array
25 Flat planar array
25 Dipole/parabolic reflector
25 Dipole/parabolic reflector
D D D D 2.2 2.2 : A : A
2.2 2.2 : A : A
IAGRAM IAGRAM IAGRAM IAGRAM C C C C PPLYING THE PPLYING THE PPLYING THE PPLYING THE
WaveCom Electronics Inc
TR2126SE Manual; ml_tr2126se_04 (May 2003)
Approved: C.H.
Antenna Gain
S S S S - - - - A A A A L L L L
ELF ELF ELF ELF DHESIVE DHESIVE DHESIVE DHESIVE ABEL ABEL ABEL ABEL
9
(dBi)
12
18
21
24