General Information; Functional Overview; Module Features - Wavecom TR2126SE Installation And Operation Manual

Mds/mmds transceiver
Table of Contents

Advertisement

1.0 GENERAL INFORMATION

1.1 Functional Overview

The WaveCom TR2126SE is an MDS/MMDS Transceiver for use in wireless systems. The TR2126SE
integrates an LNA, downconverter, upconverter, power amplifier, RF and IF diplexers to provide a one-box
solution for two-way wireless RF communications. The TR2126SE and antenna are situated outdoors and
connected to a cable modem indoors by standard RG-59 cable. A single RF connector on the weatherproofed
enclosure provides the interface to the transmit/receive antenna for rapid setup. The Transceiver is
configured to work with standard cable modem frequency plans and levels, permitting direct connection. The
Transceiver also includes an RF mute function to reduce power consumption and broadband noise emissions.

1.2 Module Features

+27 dBm output for high reverse channel system gain
Microprocessor controlled gain compensation over temperature
Low Phase Noise
Automatic transmit RF mute (transmits only when an IF signal is present)
Fully weatherized unit, suitable for outdoor mounting
Audible self install indicator (optional feature)
WaveCom Electronics Inc
TR2126SE Manual; ml_tr2126se_04 (May 2003)
Approved: C.H.
6

Advertisement

Table of Contents
loading

Table of Contents