Table of Contents
Advertisement
1.3 Specifications
UPCONVERTER SPECIFICATIONS
IF Input Frequency
RF Output Frequency
Output (1dB Compression Point)
Gain
Gain Flatness
In-band Spurious
Out-of-band Spurious
Phase Noise
IF Level for RF Activation
DOWNCONVERTER SPECIFICATIONS
RF Input Frequency
IF Output Frequency
Nominal Gain
Gain Flatness
Noise Figure
Output 3rd Order Intercept
WCS Rejection
Combined Image and PCS Rejection
Spurious
Phase Noise
GENERAL
Frequency Setting & Stability
Frequency Stability Over Time
RF Connector
IF Connector
Input/Output VSWR
DC Supply
Operating Temperature
Size
Mounting
Specifications subject to change without notice.
14.375 to 26.375 MHz
2150 to 2162 MHz
+27 dBm
20 ± 2 dB across full temperature range
+/- 1 dB
-60 dBc
-60 dBc
-93 dBc/Hz @ 10 kHz
-115 dBc/Hz @ 100 KHz
+3 dBmV
2500 to 2686 MHz
222 to 408 MHz
32 ± 2 dB
+/- 1.5 dB; ± 0.3 dB/ 6 MHz
≤5.0 dB @ 20C, typically 4.0 dB
+22 dBm at nominal gain
70 dB
85 dB
-65 dBm max.
-93 dBc/Hz @ 10 kHz
-115 dBc/Hz @ 100 kHz
± 7.5 kHz (-40 to +60°C)
<±10 kHz over 10 years
N female, 50 ohms
F female, 75 ohms
2:1
12 to 24 V, 12 Watts max.
-40 to +60°C (-40 to +140°F)
6" x 8" x 0.9" (15.24 x 20.32 x 2.29 cm)
Pole mount (1" to 1.75" (25mm to 44mm) diameter)
WaveCom Electronics Inc
TR2126SE Manual; ml_tr2126se_04 (May 2003)
Approved: C.H.
7
Advertisement
Table of Contents
