Setting The Video Format; Raw Output Via Hdmi - Leica SL2-S Instruction Manual

SETTING THE VIDEO FORMAT

Factory setting: file format MOV, resolution 4K, frame rate 29.97 fps
MOV
▸ Select
Video Format / Resolution
▸ Select
MOV
▸ Select the desired resolution
( , , ,
C4K 4K FHD FHD Slow Motion
▸ Select the desired frame rate
MP4
▸ Select
Video Format / Resolution
▸ Select
MP4
▸ Select the desired resolution
( , , )
4K FHD FHD Slow Motion
▸ Select the desired frame rate
Note
• The list of available resolutions for this camera also contains addi-
tional information, e.g. on video compression.
178
VIDEO SETTINGS ▸ VIDEO FORMAT
in the main menu
)
in the main menu

RAW OUTPUT VIA HDMI

Leica SL2-S supports the RAW format output for recordings using an
external device. The video signal will then have a 12 bit color depth.
This signal is output via the HDMI connection and can be recorded
and processed by an external device (e.g. Atomos Ninja V+).
The following devices are currently supported:
– Video Assist 12G HDR (by Blackmagic)
– Ninja V (by Atomos)
– Ninja V+ (by Atomos)
▸ Select
Video Format / Resolution
▸ Select
RAW (via HDMI)
▸ Select the desired frame rate
Notes
• With RAW output via HDMI, not the entire sensor area is read out,
but an area corresponding to the size of the Super 35 sensors of
professional cinema cameras.
• The sensor format switches automatically to
in RAW format.
• Please note the operating instructions of the external device.
in the main menu
for recordings
APS-C