Directions For Use; Control Operation - Guardian H955W Use & Care Instructions Manual

FILLING -
Make sure unit is unplugged.
1. Remove the tank lid.

CONTROL OPERATION

Power Button - Press to turn the power on/off.
Timer - Set the scheduled shutdown time from 1 to 12 hours shown on the display, the
product will shut down after the timer expires. The display will read "CO", press the timer
button to set the timer for the hour time preferred.
Night light - Press once to turn on the 7 color night light. Continue to press up to 8 times
to circulate through and select a color. The 9th press turns the light off.
Humidity Setting - Press to select the preferred humidity level. The humidity range can
be set from 40% to 75%RH. Recommended humidity is between 45-50%. When ambient
humidity reaches the select setting the unit will work in low speed. If it falls +/- 5% it will
restore to the original speed.
AUTO Mode - Press to turn on/off Auto function. This function changes the mist output
AUTO
based on the following:
Default humidity upper limit is 50%RH
1. When 40%RH
2. When 30%RH
3. When the current humidity
4. When the current humidity is
but the fan will still work, the unit will resume work until the current humidity
Mist Output - Press to select speed: 1-3.
When the tank is removed or the tank is not properly aligned, the power button will light up
(solid red), the display will show E2. Realign tank by matching the small lines on the side
of the tank and base.

DIRECTIONS FOR USE

2. Pour cool, clean water directly into the tank,
or lift handle in tank and carry to sink to fill.
Fill to MAX line on Mist Tube.
< <
current humidity
< ≤
current humidity
≤
30%RH, high mist output
≥
50%RH, the transducer will automatically stop working
50%RH, low mist output
40%RH, medium mist output
3. Return the tank lid.
<
50%RH
E-5