Table of Contents
Advertisement
• Use a ladder with a guard-rail when working on equipment with accessibility from above.
• Use suitable personal protective equipment.
• Maintenance and inspection work, as well as machine overhauls, must only be carried
out by specialised personnel or by customer service equipped with suitable personal
protective equipment, tools and aids.
• Work on electrical equipment may only be carried out by specialised personnel or by
customer service.
• The machine must be set in safe conditions before any maintenance work is started.
• Observe the expertise required for the various routine and extraordinary maintenance
operations.
Failure to observe the warnings may result in risks to personnel.
Routine maintenance
Switch off the power supply to the machine before cleaning the equipment.
The machine must not be cleaned with water jets or steam cleaners.
Cleaning the machine and accessories
• Pay attention to the choice and use of cleaning agents in order to maintain proper
performance and safety of the equipment.
• Before use, clean all internal parts and accessories with lukewarm water and neutral soap
or with products that are more than 90% biodegradable (in order to reduce the emission
of pollutants into the environment), then rinse and dry thoroughly. Where possible, use
the dishwasher for cleaning.
• Do not use detergents containing chlorine, solvent-based detergents (such as
trichloroethylene etc.), powders or abrasive agents, scouring pads or sponges to clean
the equipment, as these may damage the surfaces. Avoid the use of organic solvent
substances or essential oils. These substances could affect the synthetic elements of the
equipment.
• Do not use products (even if diluted) containing chlorine (sodium hypochlorite,
hydrochloric acid, muriatic acid, etc.) to clean the flooring under equipment.
• Take particular care when using the needle probe, bearing in mind that it is a sharp object
that must be handled with particular care when cleaning.
Preventive maintenance
• In order to ensure machine safety and performance, it is advisable to have maintenance
operations carried out by Angelo Po specialised personnel every 12 months, in
accordance with the Angelo Po service manuals. For further details, please contact your
local Angelo Po Service Centre.
Repairs and extraordinary maintenance
• Repairs and extraordinary maintenance must only be carried out by specialised and
authorised personnel. The manufacturer declines all liability for any failure or damage
caused by the intervention of technicians not authorised by the manufacturer and the
local original manufacturer's warranty.
3410330_GB
12
Advertisement
Table of Contents
