Cisco ISA 3000 Quick Start Manual page 10

Installing or Removing the SD Card (Optional)
Figure 4: SD Card Cover
1
2
For hazardous locations environments, if you are installing or removing the flash card or alarm wiring, follow
these warnings:
Warning When you connect or disconnect the power and/or alarm connector with power applied, an electrical
arc can occur. This could cause an explosion in hazardous area installations. Be sure that all power is
removed from the device and any other circuits. Be sure that power cannot be accidentally turned on or
verify that the area is nonhazardous before proceeding. Statement 1058
Warning Do not insert or remove the flash card while power is on; an electrical arc can occur. This could cause
an explosion in hazardous location installations. Be sure that power is removed or the area is nonhazardous
before proceeding. Statement 379
Product Overview
10
Phillips screw
Door pivot point
Product Overview