Battery Status Indicator; Alarm Limits - Masimo EMMA User Manual

5.3.4 Battery Status Indicator

The Battery Status Indicator is normally lit with a steady green light in the upper right corner of the 5.3.4 Battery Status Indicator
display (Battery OK). When batteries are low, the Battery Status Indicator starts blinking (approximately
The Battery Status Indicator is normally lit with a steady green light in the upper right corner of the
30 minutes before depletion for alkaline batteries).
display (Battery OK). When batteries are low, the Battery Status Indicator starts blinking (approximately
30 minutes before depletion for alkaline batteries).
There will be an audible tone beep repeated every 80 seconds when batteries are low.
There will be an audible tone beep repeated every 80 seconds when batteries are low.
The terminal voltage of alkaline batteries recovers when the batteries are not in use. The remaining time
prediction is thus unreliable during the first period after power on. Nearly depleted batteries may still be
The terminal voltage of alkaline batteries recovers when the batteries are not in use. The remaining time
able to provide a voltage above the threshold for battery low indication, even if the internal battery
prediction is thus unreliable during the first period after power on. Nearly depleted batteries may still be
resistance is too high to provide sufficient current to start up the device next time the power on button is
able to provide a voltage above the threshold for battery low indication, even if the internal battery
activated.
resistance is too high to provide sufficient current to start up the device next time the power on button is
activated.
To extend battery life time the EMMA display has an automatic brightness control which will be activated
during stable conditions. Any change in displayed vital parameters, alarm or pressing any button will
To extend battery life time the EMMA display has an automatic brightness control which will be activated
return the EMMA display to normal brightness.
during stable conditions. Any change in displayed vital parameters, alarm or pressing any button will
return the EMMA display to normal brightness.
WARNING! Replace batteries immediately when the Battery Status Indicator starts blinking.
Remaining battery time depends on battery type and other circumstances and cannot be reliably
WARNING! Replace batteries immediately when the Battery Status Indicator starts blinking.
predicted. The remaining lifetime for lithium batteries may be significantly less than 30 minutes when
Remaining battery time depends on battery type and other circumstances and cannot be reliably
the Battery Status Indicator starts blinking.
predicted. The remaining lifetime for lithium batteries may be significantly less than 30 minutes when
the Battery Status Indicator starts blinking.
WARNING! Lithium batteries may present a fire or chemical burn hazard if mistreated. Do not
disassemble, heat above 100C (212F) or incinerate. Dispose of used cells promptly. Keep away
WARNING! Lithium batteries may present a fire or chemical burn hazard if mistreated. Do not
from children.
disassemble, heat above 100C (212F) or incinerate. Dispose of used cells promptly. Keep away
from children.
WARNING! Use only Alkaline or Energizer Ultimate Lithium L92 batteries. Use of other Lithium
batteries may present a risk of fire or explosion.
WARNING! Use only Alkaline or Energizer Ultimate Lithium L92 batteries. Use of other Lithium
batteries may present a risk of fire or explosion.
5.3.5 Adjusting the ETCO
5.3.5 Adjusting the ETCO
5.3.5.1 Adjusting the High ETCO
1. Press and hold the Alarm Silence button until the display shows the "Hi ETCO2 Screen" and the
5.3.5.1 Adjusting the High ETCO
ETCO display shows the current high ETCO
1. Press and hold the Alarm Silence button until the display shows the "Hi ETCO2 Screen" and the 2
ETCO display shows the current high ETCO
2. Release the button.
2
2. Release the button.
3. To adjust the alarm limit: press the Alarm Silence button (▲) to increase, or the Power On
button (▼) to decrease the value. It is possible to switch off the high ETCO
3. To adjust the alarm limit: press the Alarm Silence button (▲) to increase, or the Power On
the limit above 99 mmHg (9.9 kPa). The EMMA Capnograph will indicate this setting by showing
button (▼) to decrease the value. It is possible to switch off the high ETCO
"- -" on the ETCO
the limit above 99 mmHg (9.9 kPa). The EMMA Capnograph will indicate this setting by showing
"- -" on the ETCO
If no button has been activated for a short period of time, the EMMA Capnograph will automatically
resume normal operation.
If no button has been activated for a short period of time, the EMMA Capnograph will automatically
resume normal operation.
18 (32)
Battery OK
Battery OK

alarm limits

2
alarm limits
2
alarm limit
2
alarm limit
2
display during the adjustment routine.
2
display during the adjustment routine.
2
alarm limit.
2
alarm limit.
2
Battery low
(Blinking)
Battery low
(Blinking)
alarm by adjusting
2
alarm by adjusting
2
18 (31)
18 (31)