Advertisement
Supporto Tecnico / Technical Support
[Replacement procedure of the paper conveying actuator]
No.
Procedure
Detach the following exterior covers while
referring to the Service Manual.
1
(The table to the right indicates the applied
pages.)
Disconnect the connector at the machine
right rear side (x3) and remove the
2
connector wires from the wire saddle.
Remove
the
3
conveying guide (x2).
Pull the front side of the paper conveying
guide (Note1) and then remove the stop
ring and the bushing.
(Note 1)
4
Note that the paper conveying guide may
be deformed if forcibly pulled.
Slightly pull it out until the paper conveying
guide naturally stops.
Modulo IO-TIB-A (Liv.06)
INFORMAZIONI RISERVATE, DA DIVULGARE SOLO SU AUTORIZZAZIONE DEL "SUPPORTO TECNICO"
CONFIDENTIAL INFORMATION ONLY TO BE DISCLOSED WITH PERMISSION FROM "TECHNICAL SUPPORT"
screw
fixing
the
paper
Bollettino Informazione Tecnica / Technical Information Bulletin
data / date
codice - progr./ code - number
22/05/14
808457
Details
Description
Right lower cover
Right lower rear cover
Right lower front cover
4 / 6
TIB
02
Pages
1-5-2 (4)
1-5-2 (5)
1-5-2 (6)
Advertisement
