10
Installation of the push-pull cable and stroke's programming on
the actuator
System's components involved: push-pull cables, actuator
In this chapter will be presented the different types of push-pull cables and how to mount them.
10.1
Push-pull cables choice
It can be used 3 different types of push-pull cables. For the connection of the push-pull cable to the actuator, it is nec-
essary to use its proper connection kit. The available kits are for Volvo® cable (E2, E3, C0, C3, C33...), Johnson® cable and
Mercruiser® stern drive cable.
10.1.1 Connection kit
Connection kit for Volvo® cable, or
cable type E2, E3, C0, C3, C33...
2x
2x
2x
Each kit is enough to connect two push-pull cables.
10.1.2 Standard push-pull cable
vetus®
Electronic engine remote control
Connection kit for Johnson® cable
2x
2x
2x
2x
2x
2x
2x
Connection kit for Mercruiser® cable
2x
2x
2x
2x
2x
51
030624.13