Startup & Shutdown - Dermalux FlexMD User Manual

Aesthetic Technology Limited
19.3 Startup & Shutdown
19.3.1 Startup
Once the Dermalux® Flex MD is connected to a mains socket, switch on using the power
button on the Controller (the button will light up in green). Refer to icon in Table 2 on page
25. Button Reference ID 1.
19.3.2 Shutdown
To initiate a shutdown, press the power button on the Controller. When not in use unplug
from the mains power socket. Refer to icon in Table 2 on page 25. Button Reference ID 1.
The Flex MD device does not require a cool down period
19.4 Selecting a Program
The following table identifies the universal icons that shall be used throughout the
Controller display software.
PL-027 (Rev 7)
24
19.4.1 Icons
Name Icon
Power
Blue
BLUE
RED
Red
NIR
NIR
Play
Table 2: Flex MD Control Buttons.
*Note the key functions will be labelled throughout the document as their button reference number.
PL-027 (Rev 7)
Button
Description
Reference ID
Turn device on and off
Activates Blue LED's for
treatment
Activates Red LED's for
treatment
Activates Near Infra-Red
LED's for treatment
Initiates 30 minute
treatment with pre-selected
LED wavelengths.
25
1
2
3
4
5