Download Print this page
Mackie Art Series ART500A Specifications

Mackie Art Series ART500A Specifications

Art series two-way active speaker system

Advertisement

ART Series
Careful acoustic design and advanced materials
have resulted in an exceptional full range, full fidelity,
self-contained sound system. The ART500A provides
an ideal combination of high power, low distortion
and wide bandwidth for permanent installations.
The two-way design consists of a 15" woofer
with a massive magnet structure for accurate,
powerful bass reproduction. The HF section uses
a Polynomial CD horn loaded to a 2" exit titanium
compression driver and new technology, ring-mode
suppression design to deliver controlled coverage
at the highest sonic purity. The CD horn is a part
of the molded enclosure. Two discrete power ampli-
fiers and an electronic crossover are matched to
the two transducers and provide time correction,
CD horn compensation, as well as peak-limiting,
over-excursion and thermal protection.
The ART500A will accept a balanced or unbal-
anced (switch selected) microphone or line input,
adjusted by a single rotary control.
All components are housed in a vented enclo-
sure formed from rigid polypropylene that is further
reinforced with two internal 15mm thick multilayer
wood panels. The woofer is protected by a metal
grille. All controls and connectors are recessed on
the rear. A 1-3/8" stand socket and M10 threaded
inserts are molded into the cabinet to provide
quick and easy installation using specially designed
accessory mounting hardware.
This Mackie Industrial product is covered by our
exclusive, one-time NO FAULT repair policy in addi-
tion to a five year, limited warranty.
ART500A
Two-Way Active Speaker System
Features
80° x 60° constant-directivity horn with 2" exit
titanium compression driver
15" high-efficiency woofer
Internal bi-amplifier: 400W LF, 100W HF, and
driver-optimized electronic crossover
Switchable balanced mic/line input
Total system protection: over-excursion,
thermal, short circuit and peak limiting
Wood-reinforced polypropylene enclosure
Built-in hand grips, M10 fly points and stand
socket
Optional installation accessories include hard-
ware for truss, grid, pipe and adjustable wall
mounts
Exclusive Mackie Industrial — one-time NO
FAULT repair policy
Five year, limited warranty
Live Sound/Music Reinforcement
Ultra High-Level AV Playback
Large Speech Systems
Dance Music Systems
1
O F 6 P A G E S

Advertisement

loading

Summary of Contents for Mackie Art Series ART500A

  • Page 1 This Mackie Industrial product is covered by our exclusive, one-time NO FAULT repair policy in addi- tion to a five year, limited warranty.
  • Page 2: Specifications

    ART500A Two-Way Active Speaker System Specifications System Acoustic Frequency Range (–10 dB): Frequency Response (–3 dB): Horz. Coverage Angle (–6 dB): Vert. Coverage Angle (–6 dB): Directivity Factor; Q (DI): 11.5 (10.6), averaged System Sensitivity Rated Maximum Peak Crossover: 1.2kHz, 24dB/octave...
  • Page 3: Vertical Polars

    ART500A Two-Way Active Speaker System ART500A Vertical Polars O F 6 P A G E S 200Hz 250Hz 0˚ 315Hz 400Hz 1.25kHz 1.6kHz 0˚ 2kHz 2.5kHz Vertical Off-Axis Frequency Response (UP) 8kHz 10kHz 0˚ 12.5kHz 16kHz Vertical Off-Axis Frequency Response (DOWN)
  • Page 4: Horizontal Polars

    ART500A ART500A Horizontal Polars 0˚ 0˚ 0˚ O F 6 P A G E S Two-Way Active Speaker System 200Hz 250Hz 315Hz 400Hz 1.25kHz 1.6kHz 2kHz 2.5kHz Horizontal Off-Axis Frequency Response 8kHz 10kHz 12.5kHz 16kHz 0˚ 500Hz 630Hz 800Hz 1kHz 0˚...
  • Page 5 11.85" (301mm) 17.28" (439mm) SIDE 8.26" (210mm) 20.35" (517mm) 25.31" (643mm) 11.96" (304mm) REAR CONCEIVED, DESIGNED, AND MANUFACTURED BY MACKIE INDUSTRIAL • MADE IN ITALY • COPYRIGHT ©1999 INPUT OUTPUT LINE/MIC VOICE MUSIC LIMIT. OPERATE VOLUME SERIAL NUMBER MANUFACTURING DATE...
  • Page 6 For this reason, any current Mackie Industrial product may differ in some respect from its published description, but will always equal or exceed the original design specifications unless otherwise stated.